RAW WHITE NYLON6 FISH NET YARN 

Nylon 6 injection molding drying treatment Since nylon 6 is easy to absorb moisture, special attention should be paid to drying before processing. If the material is supplied in waterproof packaging, the container shall be kept closed. If the humidity is greater than 0.2%, it is recommended to dry for 16 hours in hot air above 80C. If the material has been exposed to air for more than 8 hours, it is recommended to dry it under vacuum at 105C for more than 8 hours. Nylon 66 Material process parameter Melting material temperature: 240-250 ℃, 250~280C for reinforcement. Bright Nylon 6 Chips are widely used in engineering plastics and textile grade. The viscosity of Pa6 Black Chips is 2.0 ～ 3.45. Bright R.v2.45 Nylon 6 Pellets has the advantages of good appearance, good spinning performance, high strength and good dyeing performance. We use high-end liquid materials imported from the United States, Japan, the Netherlands and other countries, and use VK continuous polymerization, underwa…

Colored Nylon 6 Chips Semi Dull Nylon 6 Chips Bright Nylon 6 Chips