Pneumatic V-type Ball Valve 

Pneumatic V-type ball valve operating specifications Pneumatic actuators: Use pneumatic actuators to control the on-off action of ball valves. The actuator should have a suitable torque output capacity to ensure that the ball valve can be switched on and off normally. Air pressure: The air pressure required for ball valve operation should be within the specified range, usually 0.4-0.6MPa. Control signal: The on-off action of the ball valve is usually controlled by an electrical signal. The signal can be a voltage signal (such as 4-20mA) or a switching signal (such as 24V DC). The actuator should be able to receive and respond to this signal. Stroke: The stroke of the ball valve refers to the rotation Angle of the ball valve from full close to full open. Usually, the ball valve travel is 90 degrees, but there are other travel options. Quick switch: The ball valve should have a quick switch function so that it can be quickly opened or closed when needed. Our company's main…

Fluorine Lined Valve Pneumatic Butterfly Valve Electric Ball Valve Pneumatic Ball Valve Pneumatic Control Valve