1.Introduction Mostly in the form of inductive load of power system, will consume reactive power, makes the phase lag of the load current to voltage, phase Angle difference, the greater the reactive power demand, the greater the supply proper active power, is bound to increase current and increase the line loss. At the same time, it is often impossible for these reactive power to be supplied by generators and passed over long distances unreasonably. A reasonable method is to generate reactive power in a place where reactive power is needed. Therefore, capacitors are almost used in the distribution system to compensate for the reactive power required by the load to improve the power factor. Reactive compensation for reactive power compensation can receive the following effects: Mixer to reduce power loss, general factory power wiring according to different line and load conditions, the power loss of about 2% one 3%, after using capacitance improve power factor, reduce the total current…

Similar

Dense busbar system for Bus Duct
Horizontal Tee for Fire Resisting Support
Horizontal Tee Fire Resisting Support
Horizontal bend for Fire Resisying Support
Box substation for Switch Cabinet
Ac high pressure hexafluoride ring network switch equipment
Metal Armor Shift Switch Equipment
Cable branch box for Switch Cabinet
Series light box for Switch Cabinet
Precision Measuring Box Designed for Switch Cabinet Systems
Series distribution box for Switch Cabinet
Double power box for Switch Cabinet

Jiangsu Fansheng Electrical Technology Co.,Ltd.

Since its establishment in March 2008, Jiangsu Fansheng Electrical Technology Co., Ltd. has dedicat…
Website:

Copyrights © 2026 aevictoryparts.com All Rights.Reserved .